Brother International HL-L8260CDW Command Reference Guide for Software Develop - Page 58
Esc$=chr$27, For I=1 To 10, Lprint 0123456789, Lprint, For I=1 To 10, Lprint 0123456789, Lprint
View all Brother International HL-L8260CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
If the current cursor position is to the right of your new right margin setting, the cursor will be moved to the new right margin. The factory default left and right margin settings are at the left and right edges of the logical page respectively. Depending on your model, margin settings can be made from the printer's control panel (see the User Guide). 10 REM ***** SET AND CLEAR SIDE MARGINS ***** 20 ESC$=CHR$(27) 30 WIDTH "LPT1:",255 40 REM --- END OF LINE WRAP ON --50 LPRINT ESC$+"&s0C"; 60 REM --- LEFT MARGIN SET TO 10 COLUMNS ---70 LPRINT ESC$+"&a10L"; 80 REM --- RIGHT MARGIN SET TO 70 COLUMNS ---90 LPRINT ESC$+"&a70M"; 100 REM --- PRINT "0123456789" 10 TIMES 110 FOR I=1 TO 10 120 LPRINT "0123456789"; 130 NEXT 140 LPRINT 150 REM --- CLEAR SIDE MARGIN ---160 LPRINT ESC$+"9"; 170 REM --- PRINT "0123456789" 10 TIMES 180 FOR I=1 TO 10 190 LPRINT "0123456789"; 200 NEXT 210 REM --- PAPER EJECT ---220 LPRINT CHR$(12); 230 END 4.2.12. Resetting the horizontal margins Esc9 (27)(39) This command resets the left and right margins to the left and right edges of the logical page respectively. 4.2.13. Setting the top margin Esc&l#E (27)(38)(108)#(69) # # stands for the distance between the top of the logical page and the top margin in rows. The row height is as defined by the VMI. If you subsequently change the VMI (or the line spacing) the top margin position that you have set does not change - that is, when you specify the top margin position it remains fixed physically until you specify a new one or reset it to a default value. The top margin command is ignored if you try to set a margin greater than the current length of the logical page. The top margin command is ignored if the current VMI is 0. The factory default top margin setting is half an inch below the top of the logical page. Depending on your model, the top margin can be set from the printer's control panel (see the User Guide). 10 REM ******* SET TOP MARGIN TO 10 LINES ******* 20 REM 30 ESC$=CHR$(27) 40 LPRINT ESC$+"&l10E"; 50 LPRINT "10 LINES " 60 LPRINT CHR$(12); 70 END CHAPTER 2 PCL - 38