Brother International HL-L8260CDW Command Reference Guide for Software Develop - Page 187
FT - Fill type
View all Brother International HL-L8260CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
FT - Fill type FT n(, d(, q))[;] n ; Fill type d ; option 1 q ; option 2 Sets the fill type, interval and angle when filling an area. RA, RR, WG and CF. This setting is effective for the commands FP, The value for n must be a clamped integer number Fill type Description Option 1 Option 2 1 Solid black (bi-directional fill) 2 Solid black (single directional fill) 3 hatching (parallel line) fill interval fill angle 4 cross-hatching fill interval fill angle 10 shading shading level 11 HP-GL/2 user-defined raster-fill index 21 PCL cross-hatching pattern type 22 PCL user-defined pattern ID 130 shading (one of sixty-four gray scales) Shading level option 1 for n=3 or 4 is the setting for the interval of the lines in the fill. This is specified in current units. If d is omitted or 0, it is set to the default value which is 1% of the diagonal distance between P1 and P2. Option 2 for n=3 and 4 is the setting of the angle for the lines in degrees. If q is omitted, the fill angle already specified will be used. The value of q is a clamped real number. Option 1 for n=10 is the setting for the shading density. It is specified as a percentage from 0 to 100. Option 2 for n=10 is ignored. Option 1 for n=11 specifies the HP-GL/2 user-defined raster fill pattern. This uses the index number which is defined by the RF command. Option 2 for n=11 is ignored. Option 1 for n=21 specifies the PCL cross-hatch patterns. There are 6 types of PCL cross-hatch patterns. Option 2 for n=21 is ignored. Option 1 for n=22, the PCL user-defined patterns defined by the ESC*c#W command with a unique ID code. Option 2 for n=22 is ignored. Option 1 for n=130, the 64 gray scale shading density. It is specified as a percentage from 0 to 100. Option 2 for n=130 is ignored. 10 ' - Fill Type 20 WIDTH "LPT1:", 255 30 LPRINT CHR$(27); "E"; 40 LPRINT CHR$(27); "%0B"; 50 LPRINT "IN;SP1;"; 60 LPRINT "PA2000,2000;FT;PR2500,300;ER2500,300;" 70 LPRINT "PR0,300;FT3,80,30;RR2500.300;" 80 LPRINT "PR0,300;FT10,36;RR2500,300;ER2500,300;" 90 LPRINT CHR$(27); "%0A"; 100 LPRINT CHR$(27); "E"; 110 END CHAPTER 4 HP-GL/2 - 31