BenQ W1210ST User Manual - Page 28

Settings, Wall Color, Projector, Position, Test Pattern, Auto Source, Menu Type, HDMI Range

Get BenQ W1210ST PDF manuals and user guides View all BenQ W1210ST manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Settings • Wall Color Press OK to enter its submenu. Press BACK to save your changes and exit. See below for more details. Enable this function to help correct the projected picture's color when the projection surface is not white. You may choose a color similar to that of the projection surface from these options: Light Yellow, Pink, Light Green, or Blue. • Projector Position The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See Choosing a location for details. • Test Pattern • Auto Source Enable this function to display the grid test pattern, which helps you adjust the image size and focus so as to check if the projected image is free of distortion. Sets whether the projector searches automatically for input sources. Select On to enable the projector to scan for input sources until it acquires a signal. If the function is set to Off, the projector selects the last used input source. • Menu Type Switches to the Advanced OSD menu. • HDMI Range Selects a suitable RGB color range to correct the color accuracy. • Auto: Automatically selects a suitable color range for the incoming HDMI signal. • Full: Utilizes the Full range RGB 0-255. • Limited: Utilizes the Limited range RGB 16-235. • Reset Lamp Timer • Reset All Settings • Information HDMI Range is only available when the HDMI signal is selected. Activate this function only after a new lamp is installed. When you select Reset, a "Reset Successfully" message is displayed to notify that the lamp time has been reset to "0". Returns all settings to the factory preset values. The following settings will still remain: Keystone, Rename User Mode, Audio Setup, Language, Projector Position, Menu Type, Source Rename, Reset Lamp Timer, Test Pattern, High Altitude Mode, Password, Key Lock, and ISF. Displays the following information about your projector. • Source: Displays the current signal source. • Picture Mode: Displays the current Picture Mode. • Resolution: Displays the native resolution of the input source. • Color System: Displays input system format. • Lamp Usage Time: Displays the number of hours the lamp has been used. • 3D Format: Displays the current 3D mode. 3D Format is only available when 3D Mode is enabled. • Firmware Version: Displays the firmware version of your projector. Some information is given only when certain input sources are in use. 28 Menu Functions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
28
Menu Functions
Settings
Press
OK
to enter its submenu.
Press
BACK
to save your changes and exit.
See below for more details.
•
Wall Color
Enable this function to help correct the projected picture’s color when the projection
surface is not white. You may choose a color similar to that of the projection surface
from these options:
Light Yellow
,
Pink
,
Light Green
, or
Blue
.
•
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Choosing a location
for details.
•
Test Pattern
Enable this function to display the grid test pattern, which helps you adjust the image
size and focus so as to check if the projected image is free of distortion.
•
Auto Source
Sets whether the projector searches automatically for input sources. Select
On
to
enable the projector to scan for input sources until it acquires a signal. If the function
is set to
Off
, the projector selects the last used input source.
•
Menu Type
Switches to the
Advanced
OSD menu.
•
HDMI Range
Selects a suitable RGB color range to correct the color accuracy.
•
Auto
: Automatically selects a suitable color range for the incoming HDMI
signal.
•
Full
: Utilizes the Full range RGB 0-255.
•
Limited
: Utilizes the Limited range RGB 16-235.
HDMI Range is only available when the HDMI signal is selected.
•
Reset Lamp
Timer
Activate this function only after a new lamp is installed. When you select
Reset
, a
"
Reset Successfully
" message is displayed to notify that the lamp time has been
reset to "0".
•
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Rename User Mode, Audio
Setup, Language, Projector Position, Menu Type, Source Rename, Reset Lamp
Timer, Test Pattern, High Altitude Mode, Password, Key Lock, and ISF.
•
Information
Displays the following information about your projector.
•
Source
: Displays the current signal source.
•
Picture Mode
: Displays the current
Picture Mode
.
•
Resolution
: Displays the native resolution of the input source.
•
Color System
: Displays input system format.
•
Lamp Usage Time
: Displays the number of hours the lamp has been used.
•
3D Format
: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
•
Firmware Version
: Displays the firmware version of your projector.
Some information is given only when certain input sources are in use.