BenQ W1210ST User Manual - Page 21
Selecting an input source
View all BenQ W1210ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Selecting an input source The projector can be connected to multiple equipment at the same time. However, it only displays one full screen at a time. When starting up, the projector automatically searches for the available signals. If you want the projector to always automatically search for the signals: • Under the Advanced OSD menu, go to the System Setup : Basic menu, and enable Auto Source. (see "Auto Source" on page 38) • Under the Basic OSD menu, if there's no signal connected to the projector, go to Auto Source and enable it; if there are signals connected, go to the Settings menu, and then enable Auto Source. (see "Auto Source" on page 28 and 29) To select the video source: 1. Press SOURCE on the projector or remote control to display the source selection bar. Source HDMI1 HDMI2/MHL PC 2. Press / until your desired signal is selected and press OK. Once detected, the selected source information is displayed on the screen for seconds. If there are multiple pieces of equipment connected to the projector, repeat steps 1-2 to search for another signal. The native display resolution of this projector is in a 16:9 aspect ratio. For best display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the Aspect Ratio setting, which may cause some image distortion or loss of picture clarity. See "Aspect Ratio" for details. Renaming an input source You may rename the current input source on the source selection bar. To do this, first and foremost, you have to access the Advanced OSD menu (see page 25 for details). 1. Press MENU and then use / to go to System Setup : Basic. 2. Press to select Source Rename and press OK to display the Source Rename window. 3. Press / / / until your desired character is selected. 4. When done, press BACK to save your changes and exit. Operation 21