Beltronics Express 926 Owner's Manual - Page 9

Digit #1 solid-sws™ is  Digit #1 flashing-sws™ is  - Guard® Alert When on, unit will detect signals from Interceptor vg-2 transmitters. Factory setting is off. Use of vg-2 Guard® is recommended only in areas known to use the Interceptor vg-2. Digit #2 solid-vg-2 Guard® is  Digit #2 flashing-vg-2 Guard® is  Safety Warning System® with Digital Voice Messages EXPRESS 926 ONLY) When on, unit will provide Digital Voice announcement when sws™ transmitters are detected. Factory setting is on. When off, Digital Voice is replaced by sws™ "tone/clicking" only. Digit #3 solid-sws™ Digital Voice is  Digit #3 flashing-sws™ Digital Voice is  (sws™ tone only) Digital Voice Prompts for Radar/Laser/sws™ vg-2 Guard® (DIGIT #3 FOR EXPRESS 916 ONLY) When , unit will provide Digital Voice prompts followed by "beeps" when X/K/Ka, Laser, VG-2 Guard® and the five sws™ categories are detected. Factory setting is ON. When OFF, Digital voice prompts are replaced by separate "beeps only. Digit #3 solid-Digital Voice Prompts . Digit #3 flashing-Digital Voice is beeps" only) Note: Digital Voice messages for the Five sws™catagories are not exact to what is written on the sws™ message information. Digital Voice Prompts for Radar/Laser/vg-2 Guard®Alert EXPRESS 926 ONLY) When on, unit will provide Digital Voice prompts followed by "beeps" when X/K/Ka, Laser and vg-2 Guard®signals are detected. Additionally, EXPRESS 916 will provide Digital Voice for sws™categories only. Factory setting is on. When "off", Digital Voice prompts are replaced by "beeps" only. Digit #4 solid-Digital Voice prompts  Digit #4 flashing-Digital Voice prompts beeps" only) 