Beltronics Express 926 Owner's Manual - Page 8

Activating the City X Mode will not change Super Wideband Ka, K or instant-on X band Radar alert patterns. Note-the cty mode does not change the presentation of alerts for Laser, sws™ or vg-2 signals. City ALL (X/K/Ka)-Model 926 only City ALL provides an alternated approach for improving X, K and Ka band selectivity and is ideal for use in areas with a high level of microwave trasmissions which can cause falsing on all three bands. To engage City X/K/Ka mode, press  until the Dispay shows a capital "A". Once engaged, weak X, K or Super Wideband Ka signals encountered will provide no audible alerts until the signal strength reaches a preset level. Visual alerts are processed the instant an X, K or Super Wideband Ka signal is detected, keeping you quietly informed. Reset to Factory Settings You can reset your unit to factory settings for volume and Selectable Features. With the unit , press and hold  button then press the  and P/V buttons simultaneously. Two "beeps" and "F" in the digital display, confirm that the unit is reset to the original factory settings. Your unit is now  and ready for operation. selectable features Safety Warning System®, vg-2 Guard® Alert, 60 sws™ Digital Voice Messages (Model E926CS only) and Digital Voice prompts for Radar/Laser/vg-2 Guard® are all features which may be selected  or , depending upon your preference. These Selectable Features are referenced by the digits 3 and #4 respectively. Safety Warning System® (sws When on, unit will provide an sws™ warning when sws™ transmitters are detected. Factory setting is . 