Adaptec 2420SA User Guide - Page 85
Formatting and Verifying Disk Drives, Viewing the Event Log, Enter, Disk Utilities, Format Disk
UPC - 760884149331
View all Adaptec 2420SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Appendix C: Using the Adaptec RAID Configuration Utility ● 85 Formatting and Verifying Disk Drives You can use the disk utilities to low-level format or verify your disk drives. (New disk drives are low-level formatted at the factory and do not need to be low-level formatted again.) ! Caution: Before you format a disk drive, back up all data. Formatting destroys all data on a disk drive. To format or verify a disk drive: 1 Start the ARC utility (see page 79). 2 Select the controller you want, then press Enter. 3 Select Disk Utilities. 4 Select the disk drive you want, then press Enter. 5 Select Format Disk or Verify Disk Media. Viewing the Event Log The BIOS-based event log records all firmware events, such as configuration changes, array creation, and boot activity. Some events are not stored indefinitely-the event log is cleared of any non-persistent events each time you restart your computer; additionally, once the log is full, new events overwrite old events. To view the event log: 1 Start the ARC utility (see page 79). 2 Select the controller you want, then press Enter. 3 When the ARC utility menu appears, then press Ctrl+P. 4 Select Controller Log Information, then press Enter. The current event log opens.