Adaptec 2420SA User Guide - Page 48
Repeat Steps, operating system.
UPC - 760884149331
View all Adaptec 2420SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 7: Installing the Driver and an Operating System ● 48 If the driver fails to load, run lsdev and check for the floppy disk drive. Then, try again with the appropriate device. 7 Type boot. 8 Complete the FreeBSD installation, following the instructions included with your operating system. 9 Reboot your computer, then remove the driver disk. 10 Repeat Steps 3 through 7 the first time you boot the operating system to load the drivers again for the initial bootup. Note: Currently, Adaptec Storage Manager is not supported on FreeBSD. To create and manage arrays, use the ARC utility. See page 57 for more information.
Chapter 7: Installing the Driver and an Operating System
●
48
If the driver fails to load, run lsdev and check for the floppy disk drive. Then, try again with
the appropriate device.
7
Type
boot
.
8
Complete the FreeBSD installation, following the instructions included with your
operating system.
9
Reboot your computer, then remove the driver disk.
10
Repeat Steps
3
through
7
the first time you boot the operating system to load the drivers
again for the initial bootup.
Note:
Currently, Adaptec Storage Manager is not supported on FreeBSD. To create and
manage arrays, use the
ARC
utility. See
page 57
for more information.