Adaptec 2020SA User Guide - Page 68
Assigning Array Properties, Array Configuration Utility, Create Array, Insert, Delete, Enter
UPC - 760884145289
View all Adaptec 2020SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Adaptec RAID Configuration Utility (ARC) 4 From the ARC menu, select Array Configuration Utility. 5 From the ACU menu, select Create Array. 6 Browse with the arrow keys to select a channel. 7 Select the disks for the new array, then press Insert. To deselect a disk, highlight the disk, then press Delete. ACU displays the largest usable space available for each disk. You can use available space from multiple disks for the new array. Note: Disks containing MS-DOS partitions, disks with no usable space, or disks that are not initialized appear dimmed and cannot be used in a new array. For information on how to initialize a drive, see page A-7. 8 When you are finished selecting disks, press Enter. The Array Properties menu is displayed. Assigning Array Properties Note: The ACU can be used to assign array properties only prior to building the array. After the array is built, you need to use Adaptec Storage Manager to assign properties. To assign properties to the new array: 1 In the Array Properties menu, select an array type, then press Enter. The display shows only the array types available for the number of drives selected. The supported array types (RAID levels) for your controller are listed in Controller Features on page 1-5. The maximum number of drives allowed and minimum number of drives required depends on the RAID level. For details, see Appendix E, About RAID. 2 Type an optional label for the array, then press Enter. A-3