Adaptec 2020SA User Guide - Page 102
C:\ufi_files, Update
UPC - 760884145289
View all Adaptec 2020SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Adaptec Flash Utility (AFU) Examples In the following example, the AFU saves flash contents from controller 0 to a UFI file in the current default drive and directory: A:\> AFU SAVE /C 0 In the following example, the AFU saves flash contents from Controller 1 to a UFI file in C:\UFI_FILES. A:\> AFU SAVE /C 1 /D C:\UFI_FILES UPDATE The UPDATE command updates a controller's flash components from the flash image data in a UFI file. You can use the UPDATE command to update a single controller's flash components or to update multiple controllers on your computer. You must restart the computer following an UPDATE command. Command Syntax The command syntax for the UPDATE command is as follows: AFU UPDATE [/C] [/D ] Command Switches For details on the /C and /D switches, see the SAVE command on page C-6. Example The following example shows a typical system response after an update has been performed. A:\> AFU UPDATE /C 0 Adaptec Flash Utility V4.0-0 B5749 (c)Adaptec Inc. 1999-2002. All Rights Reserved. Updating Controller 0 (Adaptec 2410) Reading flash image file (Build 5749) AFU is about to update firmware on controllers Adaptec 2410 ***PLEASE DO NOT REBOOT THE SYSTEM DURING THE UPDATE*** This might take a few minutes. Writing Adaptec 2410 (4MB) Flash Image to controller 0...OK. Verifying...OK Please restart the computer to allow firmware changes to take effect. C-7