Actiontec V1000H User Manual - Page 54
QoS Downstream, Apply
View all Actiontec V1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 5 Advanced Setup QoS Downstream 1. Click QoS Downstream from the menu on the left side of any Advanced Setup screen. The QoS Downstream screen appears. 1. Click in the Enable radio button next to Downstream QoS to activate. 2. Select the type of QoS to enable. If selecting Custom QoS, you will have to enter a number of values: Name, Queue Priority, Reserved Bandwidth, Protocol, TOS Bit Value, Source IP or MAC address information, Destination IP Address, Netmask IP Address, and Port Pange. Do not select Custom QoS unless you are an experienced network technician. For most wireless networks, the Default QoS option should be sufficient. 3. Click Apply to save your changes. The new QoS setting will appear at the bottom of the screen, under QoS Rule List. 51