Actiontec V1000H User Manual - Page 42
Services Blocking, Apply - ip address
View all Actiontec V1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 5 Advanced Setup Services Blocking Services blocking is used to prevent a device on the Modem Router's network from accessing particular services available on the Internet, such as receiving email or downloading files from FTP sites. To set up services blocking on a networked device: 1. Click Services Blocking from the menu on the left side of any Advanced Setup screen. The Services Blocking screen appears. 2. Select the device on which you wish to block services from the Select Device drop-down list, or enter the device's IP address in the Enter IP Address text box. 3. Select a service, or multiple services, to block by clicking in the appropriate check box below Select service to block. 4. Click Apply to save your changes. 5. Repeat steps 1-4 to block services on another device on the network. The devices that are blocked from accessing services are listed at the bottom of the screen. 39