Actiontec V1000H User Manual

Actiontec V1000H Manual

Get Actiontec V1000H PDF manuals and user guides View all Actiontec V1000H manuals
Add to My Manuals
Save this manual to your list of manuals

Actiontec V1000H manual content summary:

  • Actiontec V1000H | User Manual - Page 1
    Wireless VDSL Modem Router Model #: V1000H User Manual Ver 1.0 Solutions for the Digital Life™
  • Actiontec V1000H | User Manual - Page 2
    Default Settings 29 Upgrade Firmware 31 Ping Test 32 Traceroute 33 Web Activity Log 34 Time Zone 34 ConfiguringAdvanced Setup 36 Accessing Advanced Setup Options 36 Services Blocking 39 Website Blocking 40 Scheduling Access 41 Broadband Settings 43 WAN IP Address 44 LAN IP
  • Actiontec V1000H | User Manual - Page 3
    Remote GUI 52 Remote Telnet 53 Dynamic Routing 54 Static Routing 55 Admin Password 56 Port Forwarding 57 Applications 58 DMZ Hosting 60 Firewall 61 NAT 62 UPnP 62 Viewing the Modem Router's Status 63 Accessing Wireless Settings 63 Connection Status 65 WAN Status 66 WAN
  • Actiontec V1000H | User Manual - Page 4
    the Actiontec Wireless VDSL Modem Router. With its powerful wireless N radio, gigabit Ethernet switch, and WAN port, as well as its dual-core processor and support for HPNA, the Modem Router will propel you to new speeds as you traverse the Internet. We are sure the Modem Router will provide
  • Actiontec V1000H | User Manual - Page 5
    Wireless VDSL Modem Router • 64-, 128-, and 256-bit WEP/WPA/WPA2 wireless LAN security • IEEE 802.3 Ethernet standard compliance • Four 10/100/1000 Base-T Ethernet ports (LAN) • One 10/100/1000 Base-T Ethernet ports (WAN) • DHCP server option • MAC address cloning • QoS support, including diffserv
  • Actiontec V1000H | User Manual - Page 6
    , etc. The Modem Router has several indicator lights (LEDs) and a button on its front panel, and a series of ports and switches on its rear panel. Front Panel The front panel of the Modem Router features 11 LEDs: Power, DSL, Internet, WAN Ethernet, Internet, Ethernet (4), HPNA, USB, Wireless and WPS
  • Actiontec V1000H | User Manual - Page 7
    and technical support should be contacted. If the Power LED is flashing red, the Modem Router is performing a firmware update. DSL The DSL LED illuminates when the Modem Router is connected to an xDSL line. If the DSL LED is flashing, the Modem Router is in training for DSL service. WAN Ethernet
  • Actiontec V1000H | User Manual - Page 8
    LED illuminates when a USB device is connected via the Modem Router's USB port. This port is not currently operational, but may be enabled in a future firmware update. Wireless The Wireless LED illuminates when the Modem Router is connected wirelessly, assuming the Modem Router's Wireless feature is
  • Actiontec V1000H | User Manual - Page 9
    cable. USB Port The USB port is used to connect the Modem Router to a USB device. This port is not yet active; it may be activated in a future firmware update. Reset Switch Depressing the Reset switch for one second will restore the Modem Router's factory default settings. To reset the Modem Router
  • Actiontec V1000H | User Manual - Page 10
    with the Modem Router, including describing the Modem Router's Home screen and setting up the Modem Router through the Quick Start screens. Accessing the Home Screen To access the Wireless screens: 1. Open a Web browser. In the Address text box, type: http://192.168.0.1 then press Enter on the
  • Actiontec V1000H | User Manual - Page 11
    Wireless VDSL Modem Router 2. The Modem Router's host screen appears. Click Manual Setup. 3. The Quick Setup screen appears, with a row of large icons across the top of the screen. Click Homepage. 8
  • Actiontec V1000H | User Manual - Page 12
    access the other four main sections of the Modem Router's firmware by clicking on the appropriate icon: Status; Quick Setup, Wireless Setup; Utilities; and Advanced Setup. Clicking the Home icon in any other firmware screen generates the Home screen. Internet Services On the right side of the screen
  • Actiontec V1000H | User Manual - Page 13
    you through automatically connecting the Modem Router with your ISP. From Provider List Setup Option Selecting this option generates a procedure wizard that guides you through connecting the Modem Router with an ISP that appears on the list that appears. Only ADSL customers can access this option
  • Actiontec V1000H | User Manual - Page 14
    click Next. 2. Another Quick Setup screen appears. Select the WAN interface you are using from the WAN Interface drop-down list. 3. Select the protocol used by your ISP by clicking in the appropriate radio button. If PPPoE or PPPoA was selected, enter the PPP username and password in the text boxes
  • Actiontec V1000H | User Manual - Page 15
    Wireless VDSL Modem Router Log Into My Device Selecting this option generates a screen asking for your username and password. After entering them correctly, the Home screen appears, where you can access the Modem Router's graphical user interface. 12
  • Actiontec V1000H | User Manual - Page 16
    the options provided in the Wireless section of the Modem Router's firmware, including setting up wireless security and WPS. Accessing Wireless Settings To access the Wireless screens: 1. Open a Web browser. In the Address text box, type: http://192.168.0.1 then press Enter on the keyboard. 13
  • Actiontec V1000H | User Manual - Page 17
    Wireless VDSL Modem Router 2. The Modem Router's host screen appears. Click Manual Setup. 3. The Quick Setup screen appears, with a row of large icons across the top of the screen. Click Wireless Setup. 14
  • Actiontec V1000H | User Manual - Page 18
    Chapter 3 Wireless Settings 4. The Wireless Setup screen appears, with list of options on the left side of the screen. The rest of this chapter explains the options found in the menu on the left side of every wireless settings screen. 15
  • Actiontec V1000H | User Manual - Page 19
    Wireless VDSL Modem Router Basic Settings Click Basic Settings from any Wireless screen to generate the Basic Settings screen. This screen displays step-by-step instructions to set up a secure wireless network with the Modem Router. To configure the basic wireless settings of the Modem Router: 1.
  • Actiontec V1000H | User Manual - Page 20
    in the radio button next to WPA/WPA2. This type of wireless security is the recommended choice, and will secure the Modem Router's wireless network against outside intruders who try to gain access to the wireless network without your knowledge. 5. Enter a pre-shared key (PSK) in the text box next to
  • Actiontec V1000H | User Manual - Page 21
    Modem Router's wireless network. To change the security settings of the Modem Router's wireless network: 1. If needed, change the name of the Modem Router's wireless it later, when connecting other wireless devices (such as smartphones or laptop computers) to the Modem Router's wireless network. 2.
  • Actiontec V1000H | User Manual - Page 22
    to Use Default Security Key/Passphrase. The Modem Router automatically generates a strong security key that is difficult to crack. Be sure to write down the secuirty key, which appears in green text. You will need it to connect other wireless devices to the Modem Router's wireless network. 5. Click
  • Actiontec V1000H | User Manual - Page 23
    green text. You will need it to connect other wireless devices to the Modem Router's wireless network. 3. Click Apply. The Modem Router's wireless network is now functional and using WEP security. Radio Setup Click Radio Security from any Wireless screen to generate the Radio Secuirity screen. This
  • Actiontec V1000H | User Manual - Page 24
    3 Wireless Settings To change the radio settings of the Modem Router's wireless network Set the MSDU (MAC-Layer Service Data Unit) aggregation state by clicking in the Enable or Disable radio buttons below step 6. MDSU should only be enabled/disabled by an experienced network technician. 7. Set
  • Actiontec V1000H | User Manual - Page 25
    Setup from any Wireless screen to generate the SSID Setup screen. This screen lets you make changes to the name of the Modem Router's wireless network name, as well as letting you turn off the wireless network name broadcast option. To change the network name settings of the Modem Router's wireless
  • Actiontec V1000H | User Manual - Page 26
    the Modem Router's wireless network for any wireless devices (such as laptop computers) by the devices' MAC address. A MAC address is a unique code that identifies every wireless-capable device (printers, computers, hard drives, etc.). To set up authentication on the Modem Router's wireless network
  • Actiontec V1000H | User Manual - Page 27
    Wireless VDSL Modem Router 4. Begin creating your list by selecting a wireless device that appears on the Select Device Name drop-down list. You can also enter a devices MAC address in the Manually Add MAC Address text box. 5. Click Apply. The device will appear in the MAC Authentication Device List
  • Actiontec V1000H | User Manual - Page 28
    . End Device PIN 1. Select End Device PIN from the drop-down list. 2. Enter the end device's PIN in the appropriate text box. 3. Click Connect. The Modem Router joins the existing wireless network. WMM Click WMM in any Wireless screen to generate the WMM (Wi-Fi Multimedia) screen. Wi-fi Multimedia
  • Actiontec V1000H | User Manual - Page 29
    (Remote Authentication Dial-in Service) server for authentication purposes. This server must be physically connected to the Modem Router. Also, the user must enable the RADIUS client embedded in the Modem Router. To set up 802.1x security: 1. Select the Modem Router's wireless network name from the
  • Actiontec V1000H | User Manual - Page 30
    of the Modem Router's firmware, including services blocking, restoring the Modem Router to factory default settings, and performing a ping test. Accessing Utilities To access the Utilities screens: 1. Open a Web browser. In the Address text box, type: http://192.168.0.1 then press Enter on the
  • Actiontec V1000H | User Manual - Page 31
    Wireless VDSL Modem Router 2. The Modem Router's host screen appears. Click Manual Setup. 3. The Quick Setup screen appears, with a row of large icons across the top of the screen. Click Utilities. 28
  • Actiontec V1000H | User Manual - Page 32
    . This may take up to one minute. To reenter the Modem Router's firmware after restarting the Modem Router, click the web browser's Refresh button. Restoring Factory Default Settings If the Modem Router's factory default settings need to be restored (to build a new network from the beginning, for
  • Actiontec V1000H | User Manual - Page 33
    wireless and firwall settings) will be deleted, and the factory default settings restored. Note: All of the Modem Router's settings and parameters will be restored to their default values after performing the Restore Factory Default procedure. This includes the user name and password; the user
  • Actiontec V1000H | User Manual - Page 34
    upgrade the Modem Router's firmware. Actiontec periodically updates the Modem Router's firmware to enhance performance, add new capabilities, and eradicated software bugs. To upgrade the Modem Router's firmware: 1. Go to the Actiontec support web site (http://www.actiontec.com/support/) and select
  • Actiontec V1000H | User Manual - Page 35
    Wireless VDSL Modem Router Ping Test Selecting Ping Test from any Utilities screen generates the Ping Test screen, which is used to check whether the Modem Router is properly connected to the Internet. Follow the on-screen instructions to perform the test. The results will be displayed at the bottom
  • Actiontec V1000H | User Manual - Page 36
    Chapter 4 Utilities Traceroute Selecting Traceroute from any Utilities screen generates the Traceroute screen, which is used to determine the route taken by packets across a network. Follow the on-screen instructions to perform the test. The results will be displayed at the bottom of the screen. 33
  • Actiontec V1000H | User Manual - Page 37
    Wireless VDSL Modem Router Web Activity Log To check the web activity on the Modem Router's network, click Web Activiy Log , click Refresh. Time Zone To set the correct time zone on the Modem Router: 1. Click Time Zone from the left side of any Advanced Setup screen. The Time Zone screen appears. 34
  • Actiontec V1000H | User Manual - Page 38
    Chapter 4 Utilities 2. Click in the appropriate radio button for your time zone. 3. If daylight saving is currently in effect, click in the "Day Light Saving" check box to activate 4. Click Apply to save your settings. 35
  • Actiontec V1000H | User Manual - Page 39
    Setup section of the Modem Router's firmware, including services blocking, firewall options, and setting up QoS (Quality of Service). Accessing Advanced Setup Options To access the Advanced Setup screens: 1. Open a Web browser. In the "Address" text box, type: http://192.168.0.1 then press Enter
  • Actiontec V1000H | User Manual - Page 40
    Chapter 5 Advanced Setup 2. The Modem Router's host screen appears. Click Manual Setup. 3. The "Quick Setup" screen appears, with a row of large icons across the top of the screen. Click Advanced Setup. 37
  • Actiontec V1000H | User Manual - Page 41
    Wireless VDSL Modem Router 4. An "Advanced Setup" screen appears, with list of options on the left side of the screen. The rest of this chapter explains the options found in the menu on the left side of every advanced setup settings screen. 38
  • Actiontec V1000H | User Manual - Page 42
    Advanced Setup Services Blocking Services blocking is used to prevent a device on the Modem Router's network from accessing particular services available on the Internet, such as receiving email or downloading files from FTP sites. To set up services blocking on a networked device: 1. Click Services
  • Actiontec V1000H | User Manual - Page 43
    from accessing particular web sites on the Internet. To set up web site blocking on the Modem Router's network: 1. Click Website Blocking from the menu on the left side of any Advanced Setup screen. The Website Blocking screen appears. 2. Enter the web site address of the web site to be blocked
  • Actiontec V1000H | User Manual - Page 44
    Scheduling Access from the menu on the left side of any Advanced Setup screen. The Scheduling Access screen appears. 2. Select the device on which you want to scheduled Internet access from the Select Device drop-down list, or enter the device's MAC address in the Enter MAC Address text box. 41
  • Actiontec V1000H | User Manual - Page 45
    Wireless VDSL Modem Router 3. Select the days of the week during which you want to allow Internet access by clicking in the appropriate check box below "Select the days of the week..." 4. Set the time range during which you want to allow Internet access. This time range will apply only to the days
  • Actiontec V1000H | User Manual - Page 46
    Chapter 5 Advanced Setup Broadband Settings The Broadband Settings screen allows the Modem Router to connect to different service providers, which may have different connection parameters than the Modem Router's default settings. To change Broadband Settings: 1. Click Broadband Settings from the
  • Actiontec V1000H | User Manual - Page 47
    Wireless VDSL Modem Router WAN IP Address The WAN IP Address screen allows you to manually set up the WAN IP address of the Modem Router. To do this: 1. Click WAN IP Address from the menu on the left side of any Advanced Setup screen. The WAN IP Address screen appears. 44
  • Actiontec V1000H | User Manual - Page 48
    Internet connections (such as fixed point wireless) may use either DHCP or static IP address. If unsure which connection is present, check with Verizon before continuing. 3. If using PPPoA or PPPoE was selected in step 1, enter the user name and password in the appropriate text boxes. If the ISP
  • Actiontec V1000H | User Manual - Page 49
    Wireless VDSL Modem Router LAN IP and DHCP Settings The LAN IP and DHCP Settings screen allows you to change the Modem Router's default LAN IP address, and adjust the DHCP settings. To change the LAN IP: 1. Click LAN IP and DHCP Settings from the menu on the left side of any Advanced Setup screen.
  • Actiontec V1000H | User Manual - Page 50
    Setup 2. Enter the new modem IP address and modem subnet mask in the appropriate text boxes. 3. Click Apply and Reboot. The Modem Router reboots with the new settings. To change the Modem Router's DHCP settings: 4. Click Enable to activate the Modem Router's DHCP server. 5. Enter the DHCP server
  • Actiontec V1000H | User Manual - Page 51
    side of any Advanced Setup screen. The WAN VLANs screen appears. 2. Enter the name of the VLAN in the VLAN name text box. 3. Select a protocol from the drop-down list (options are PPPoE, RFC 1483 Transparent Bridging, and RFC 1483 via DHCP), then enter a user name and password in the appropriate
  • Actiontec V1000H | User Manual - Page 52
    then entering a VLAN ID (1 to 4094) and selecting a Priority (0-7). 5. Click Add to add the VLAN to the VLAN list, which appears at the bottom of the screen. You can also delete existing VLANs by clicking Delete, or modify a VLAN's settings by clicking Modify. HPNA Settings The HPNA Settings screen
  • Actiontec V1000H | User Manual - Page 53
    IP or MAC address information, Destination IP Address, Netmask IP Address, and Port Pange. Do not select Custom QoS unless you are an experienced network technician. For most wireless networks, the Default QoS option should be sufficient. 3. Click Apply to save your changes. The new QoS setting
  • Actiontec V1000H | User Manual - Page 54
    IP or MAC address information, Destination IP Address, Netmask IP Address, and Port Pange. Do not select Custom QoS unless you are an experienced network technician. For most wireless networks, the Default QoS option should be sufficient. 3. Click Apply to save your changes. The new QoS setting
  • Actiontec V1000H | User Manual - Page 55
    . 3. Enter a user name and password in the appropriate text boxes beneath step 2. 4. Set the remote management port. It is set to port 443 by default. If the remote management port number has been changed, you will need to use the URL "https://" followed by the Modem Router's IP address, a colon
  • Actiontec V1000H | User Manual - Page 56
    Modem Router so that it can be accessed from a remote (not local) telnet device. To use: 1. Click Remote Telnet from the menu on the left side of any Advanced Setup screen. The Remote Telnet screen appears. 2. Click in the Enable radio button next to Remote Telnet to activate. 3. Enter a username
  • Actiontec V1000H | User Manual - Page 57
    Wireless VDSL Modem Router Dynamic Routing The Dynamic Routing screen allows you to set up the Modem Router for dynamic routing, which is useful if the Modem Router is set up in a network behind a modem To use: 1. Click Dynamic Routing from the menu on the left side of any Advanced Setup screen. The
  • Actiontec V1000H | User Manual - Page 58
    5 Advanced Setup Static Routing The Static Routing screen allows you to set up static routes on the Modem Router. To use: 1. Click Static Routing from the menu on the left side of any Advanced Setup screen. The Static Routing screen appears. 2. Enter the destination IP address of the static route in
  • Actiontec V1000H | User Manual - Page 59
    Wireless VDSL Modem Router Admin Password To change the password that allows access to the Modem Router's firmware screens: 1. Click Admin Password from the menu on the left side of any Advanced Setup screen. The Admin Password screen appears. 2. If needed, enter a new username in the text box next
  • Actiontec V1000H | User Manual - Page 60
    5 Advanced Setup Port Forwarding Port forwarding is used for Internet applications that need access to devices connected to the Modem Router's network: 1. Click Port Forwarding from the menu on the left side of any Advanced Setup screen. The Port Forwarding screen appears. 2. Enter a starting
  • Actiontec V1000H | User Manual - Page 61
    Wireless VDSL Modem Router 5. If applicable, enter the starting, ending, and remote IP address of the remote port in the appropriate text boxes. 6. Click Apply to save your changes. The port forwarding rules you create are listed at the bottom of the screen, under Applied Port Forwarding Rules.
  • Actiontec V1000H | User Manual - Page 62
    Chapter 5 Advanced Setup 2. Select the device on the Modem Router's network that you want the application to work with. Alternatively, you can enter the device's IP address in the appropriate text box. 3. Select the application from the Applications drop-down list. To make searching easier, you can
  • Actiontec V1000H | User Manual - Page 63
    DMZ Hosting in any Advanced Setup screen. The DMZ Hosting screen appears. 2. Click in the Enable radio button to activate DMZ hosting. 3. Select the device on the Modem Router's network that you want use as the DMZ host. Alternatively, you can enter the device's IP address in the appropriate text
  • Actiontec V1000H | User Manual - Page 64
    Selecting Firewall from any Advanced Setup screen generates the Firewall screen. The Modem Router's firewall allows you to set up comprehensive security around your network, although some network functionality will be lost. To use: 1. Click Firewall in any Advanced Setup screen. The Firewall screen
  • Actiontec V1000H | User Manual - Page 65
    in the Disable radio button, then click Apply. This action should be undertaken by an experienced network technician only. UPnP Selecting UPnP (Universal Plug and Play) from any Advanced Setup screen generates the UPNP screen, which is used to set up gaming consoles on the Modem Router's network. To
  • Actiontec V1000H | User Manual - Page 66
    by the Modem Router, which allow you check on various parameters, including WAN connections, WAN Etherent connection, and wireless status. Accessing Wireless Settings To access the Wireless screens: 1. Open a Web browser. In the Address text box, type: http://192.168.0.1 then press Enter on the
  • Actiontec V1000H | User Manual - Page 67
    Wireless VDSL Modem Router 2. The Modem Router's host screen appears. Click Manual Setup. 3. The Quick Setup screen appears, with a row of large icons across the top of the screen. Click Status. 64
  • Actiontec V1000H | User Manual - Page 68
    table displays various parameters regarding the Internet connection of the Modem Router, including broadband and ISP connection status, upstream rate, least time remaining, and DNS addresses. The only user-configurable option in the screen are the Connect and Disconnect buttons, which, when clicked
  • Actiontec V1000H | User Manual - Page 69
    Wireless VDSL Modem Router WAN Status Click WAN Status from any Status screen to generate the WAN Status screen. This table displays various parameters relating to the WAN connection of the Modem Router, including PPP and broadband status. There are no user-configurable options in this screen, but
  • Actiontec V1000H | User Manual - Page 70
    Status from any Status screen to generate the WAN Ethernet Status screen. This table displays various parameters relating to the WAN Ethernet connection of the Modem Router, including subnet mask, default Modem Router, and sent packets. There are no user-configurable options in this screen. 67
  • Actiontec V1000H | User Manual - Page 71
    Wireless VDSL Modem Router Routing Table Click Routing Table from any Status screen to generate the Routing Table screen. This screen displays the Modem Router's routing table. There are no user-configurable options in this screen. Firewall Status Click Firewall Status from any Status screen to
  • Actiontec V1000H | User Manual - Page 72
    displays the Modem Router's NAT table. There are no user-configurable options in this screen. Wireless Status Click Wireless Status from any Status screen to generate the "Wireless Status" screen. This table displays the Modem Router's wireless network statistics, including wireless security type
  • Actiontec V1000H | User Manual - Page 73
    Router Modem Utilization Click Modem Utilizations from any Status screen to generate the Modem Utilization screen. This table displays the Modem Router's modem statistics, including wireless memory used, LAN TCP settings, and, at the bottom of the screen, a LAN device session log. There are no user
  • Actiontec V1000H | User Manual - Page 74
    Status Click LAN Status from any Status screen to generate the LAN Status screen. This table displays the Modem Router's LAN (local network) statistics, including Ethernet connections, HPNA link status, and various networked device details. There are no user-configurable options in this screen. 71
  • Actiontec V1000H | User Manual - Page 75
    V1000H (Wireless VDSL Modem Router) Standards IEEE 802.3 (10BaseT) IEEE 802.3u (100BaseTX) IEEE 802.3ab (1000BaseTX) IEEE 802.11b/g/n (Wireless) G.dmt, G.lite t1.413 RFC 1483, 2364, 2516 Protocol LAN - CSMA/CD WAN - PPP, DHCP, Static IP WAN VDSL2 interface LAN 10/100/1000 RJ-45 switched ports Speed
  • Actiontec V1000H | User Manual - Page 76
    .) @ 300 Mbps Outdoors Up to 457M (1500 ft.) @ 300 Mbps Topology Star (Ethernet) LED Indicators Power, DSL, WAN Ethernet, Internet, LAN Ethernet (4), HPNA, USB, Wireless Environmental Power External, 10V DC, 1.6A Certifications FCC Class B, FCC Class C (part 15, 68), CE Mark Commercial, UL Operating
  • Actiontec V1000H | User Manual - Page 77
    used in accordance with the instructions, may cause harmful interference user is encouraged to try to correct the interference by implementing one or more of the following measures: s Reorient or relocate the receiving antenna; s Increase the separation between the equipment and receiver; s Connect
  • Actiontec V1000H | User Manual - Page 78
    20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For questions regarding your product or the FCC declaration, contact: Actiontec Electronics, Inc. 760 North Mary Ave. Sunnyvale, CA 94086 United States Tel: (408) 752-7700 Fax: (408
  • Actiontec V1000H | User Manual - Page 79
    warrants to the end user ("Customer") that this hardware product will be free from defects in workmanship and materials, under normal use and service, for twelve (12) months from the date of purchase from Actiontec Electronics or its authorized reseller. Actiontec Electronics' sole obligation under
  • Actiontec V1000H | User Manual - Page 80
    APPLY TO SUCH THIRD-PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE. Obtaining Warranty Service: Customer may contact Actiontec Electronics Technical Support Center within the applicable warranty period to obtain warranty
  • Actiontec V1000H | User Manual - Page 81
    Wireless VDSLS/GigE Modem/Router WARRANTIES EXCLUSIVE: IF AN ACTIONTEC ELECTRONICS' PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT ACTIONTEC ELECTRONICS' OPTION. TO THE FULL EXTENT
  • Actiontec V1000H | User Manual - Page 82
    Support in the event the Customer is not satisfied with Actiontec Electronics' response to the complaint. In the event that the Customer is still not satisfied with the response of the Director of Technical Support, the Customer is instructed on Contracts for the International Sale of Goods. 79
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Wireless VDSL
Modem Router
Model #: V1000H
User Manual
Ver 1.0
Solutions for the Digital Life
™