2012 Yamaha Motorsports Raider SCL Owners Manual - Page 31
2012 Yamaha Motorsports Raider SCL Manual
Page 31 highlights
INSTRUMENT AND CONTROL FUNCTIONS To release the helmet from the helmet holder Remove the rider seat, remove the helmet holding cable from the helmet holder and the helmet, and then install the seat. EAU38405 Adjusting the shock absorber assembly This shock absorber assembly is equipped with a spring preload adjusting nut. ECA10101 NOTICE 1. Helmet holding cable 2. Helmet To avoid damaging the mechanism, do not attempt to turn beyond the maximum or minimum settings. Adjust the spring preload as follows. 4 3. Place the helmet on the left side of the vehicle, and then install the rider seat. WARNING! Never ride with a helmet attached to the helmet holder, since the helmet may hit objects, causing loss of control and possibly an accident. [EWA10161] NOTICE: Be sure to place the helmet on the left side of the vehicle. Some helmets may contact the muffler when placed on the right side because of their size or shape. [ECA15331] 1. Locknut 2. Spring preload adjusting nut 1. Loosen the locknut. 2. To increase the spring preload and thereby harden the suspension, turn the adjusting nut in direction (a). To decrease the spring pre4-14