2012 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 86
2012 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 86 highlights
13. Connect the air filter case cover to the air filter joint. 14. Install the air filter case cover by installing the screws, and then tighten the air filter joint screw. 15. Install the breather hose. 16. Install the seat. TIP The air filter element should be cleaned every 20- 40 hours. It should be cleaned and lubricated more often if the ATV is operated in extremely dusty areas. Each time the air filter element maintenance is performed, check the air inlet of the air filter case for obstructions. Check the air filter case rubber joint to the carburetor fittings and the rubber joint manifold fittings for an air-tight seal. Tighten all fittings securely to avoid the possibility of unfiltered air entering the engine. V-belt case air filter element 1. Place the ATV on a level surface. 2. Remove the front carrier by removing the bolts. 2 1 1 1 1. Front carrier bolt 2. Front carrier 8 3. Remove the panel by removing the quick fasteners, and then pulling it upward as shown. 8-20