2012 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 110
2012 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 110 highlights
EBU25263 ECB00640 Replacing the fuse NOTICE To prevent accidental short-circuiting, turn off the main switch when checking or replacing a fuse. 2 1 1. Fuse 2. Spare fuse 2. Remove the blown fuse, and then install a new fuse of the specified amperage. WARNING! Always use a fuse of the specified rating, and never use a substitute object in place of the proper fuse. An improper fuse or a substitute object can cause damage to the electrical system, which could lead to a fire. [EWB02172] Specified fuse: 15.0 A 3. Turn the key to "ON" and turn on the electrical circuits to check if the devices operate. 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. EBU25481 8 The fuse holder is located on the right side of the ATV. If the fuse is blown, replace it as follows. 1. Turn the key to "OFF" and turn off all electrical circuits. Replacing a headlight bulb If a headlight bulb burns out, replace it as follows. 8-44