2012 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 80
2012 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 80 highlights
9. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, immediately turn the engine off and check for the cause. 10. Turn the engine off, wait at least ten minutes, and then check the oil level and correct it if necessary. EBU27026 4 3 2 1 Transmission oil The transmission oil level should be checked before each ride. In addition, the transmission oil must be changed at the intervals specified in the periodic maintenance and lubrication chart. 8 To check the transmission oil level 1. Place the ATV on a level surface. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Wait a few minutes until the oil settles, and then loosen the transmission oil check screw located at the right side of the crankcase until oil flows out. 1 1. 2. 3. 4. Transmission oil check screw Gasket Correct oil level Transmission oil 4. If no oil flows out, remove the transmission oil filler bolt and its gasket. 8-14