2011 Yamaha Motorsports V Star 650 Custom Owners Manual - Page 72
2011 Yamaha Motorsports V Star 650 Custom Manual
Page 72 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT EAU24360 Front wheel EAU24601 2. Lift the wheel up between the fork legs. TIP Make sure that there is enough space between the brake pads before inserting the brake disc and that the slot in the speedometer gear unit fits over the retainer on the fork leg. 1. Wheel axle 2. Front wheel axle pinch bolt To remove the front wheel EWA10821 WARNING To avoid injury, securely support the vehicle so there is no danger of it falling over. 1. Disconnect the speedometer cable from the front wheel. 7 1. Speedometer cable 3. Lift the front wheel off the ground according to the procedure on page 7-33. 4. Pull the wheel axle out, and then remove the wheel. NOTICE: Do not apply the brake after the wheel has been removed together with the brake disc, otherwise the brake pads will be forced shut. [ECA11071] EAU24933 1. Speedometer gear unit 2. Speedometer cable 3. Retainer 2. Loosen the front wheel axle pinch bolt, then the wheel axle. To install the front wheel 1. Install the speedometer gear unit into the wheel hub so that the projections mesh with the slots. 3. Insert the wheel axle. 4. Lower the front wheel so that it is on the ground, and then put the sidestand down. 5. Tighten the wheel axle to the specified torque. 7-34