2010 Yamaha Motorsports RS Venture Owners Manual - Page 18
2010 Yamaha Motorsports RS Venture Manual
Page 18 highlights
Control functions Odometer and tripmeter modes E LO counting the distance traveled from that point. When this occurs, change the engine oil as soon as possible. (See page 53 for the oil change procedure.) E LO 1 1. Odometer/tripmeter/fuel reserve tripmeter Push the "SELECT" button to switch the display between the odometer mode "ODO" and the tripmeter modes "TRIP A" and "TRIP B" in the following order: ODO → TRIP A → TRIP B → ODO If the fuel level warning indicator and warning light come on (see page 14), the odometer display will automatically change to the fuel reserve tripmeter mode "F-TRIP" and start counting the distance traveled from that point. In that case, push the "SELECT" button to switch the display between the various tripmeter and odometer modes in the following order: F-TRIP → ODO → TRIP A → TRIP B → FTRIP To reset a tripmeter, select it by pushing the "SELECT" button, and then push the "RESET" button for at least 1 second. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically, and the display will return to the prior mode after the snowmobile has been refueled and traveled 5 km (3 mi). TIP G G The oil change tripmeter will flash only when the snowmobile is stopped. To return to the previous display mode, push the "SELECT" button. To display the oil change tripmeter again, turn the main switch to the off position, then back to the on position. Oil change tripmeter When the periodic oil change interval is reached at the initial 800 km (500 mi), then at every 4000 km (2500 mi) thereafter, the oil change tripmeter and "OIL" flash alternately in the odometer display, and the tripmeter starts After changing the engine oil, reset the oil change tripmeter as follows. To reset the oil change tripmeter 1. Push the "RESET" button for approximately 1 second while the oil change tripmeter and "OIL" are flashing alternately in the odometer display. The distance traveled since the last oil change and "OIL" will flash alternately in the odometer display. 2. Push the "RESET" button for approximately 3 seconds. "00000" and "OIL" will flash alternately in the odometer display 3 times, and then the display will return to the previous display mode. If the engine oil is changed before the oil change tripmeter appears in the display (i.e., before the periodic oil change interval has 12