2010 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 121
2010 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 121 highlights
EBU27812 Cleaning the spark arrester Select a well-ventilated area free of combustible materials and make sure the exhaust and muffler are cool. 1. Remove the bolts. 1. Tailpipe 2. Spark arrester 3. Gasket 1. Bolt 2. Remove the tailpipe by pulling it out of the muffler, and then remove the gasket. 3. Tap the tailpipe lightly, and then use a wire brush to remove any carbon deposits from the spark arrester portion of the tailpipe and inside of the tailpipe housing. 4. Check the gasket for damage, and replace it if necessary. 5. Install the gasket, and then insert the tailpipe into the muffler and align the bolt holes. 6. Install the bolts and tighten them to the specified torque. Tightening torque: Tailpipe bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 7. Remove the purging bolt and its gasket. 8-41 8