2010 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 119
2010 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 119 highlights
1. Sponge material 2. Air filter mesh 5. Clean the mesh with solvent, and then wipe the solvent off. 6. Wash the sponge material gently, but thoroughly, in solvent. WARNING! Always use parts cleaning solvent to clean the sponge material. Never use low-flash-point solvents or gasoline to clean the sponge material because the engine could catch fire or explode. [EWB01941] 7. Squeeze the excess solvent out of the sponge material and let it dry. NOTICE: Do not twist the sponge material when squeezing it. [ECB00441] 8. Check the sponge material and replace it if damaged. 9. Apply Yamaha foam air filter oil or other quality foam air filter oil to the sponge material. TIP The sponge material should be wet but not dripping. 10. Install the mesh and the sponge material into the air filter case. NOTICE: Make sure that the air filter element is properly seated in the air filter case. Never operate the engine with the air filter element removed. This will allow unfiltered air to enter the engine, causing rapid engine wear and possible 8-39 8