2010 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 112
2010 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 112 highlights
water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced. [ECB01011] 1. Maximum level mark 2. Minimum level mark 8 3. If the coolant is at or below the minimum level mark, remove panel D. (See page 8-8.) 4. Remove the coolant reservoir cap, add coolant or distilled water to the maximum level mark, install the reservoir cap, and then install the panel. NOTICE: If coolant is not available, use distilled water or soft tap water instead. Do not use hard water or salt water since they are harmful to the engine. If water has been used instead of coolant, replace it with coolant as soon as possible, otherwise the cooling system will not be protected against frost and corrosion. If 8-32 1. Coolant reservoir cap 2. Maximum level mark 3. Minimum level mark Coolant reservoir capacity (up to the maximum level mark): 0.24 L (0.25 US qt, 0.21 Imp.qt)