2010 Yamaha Motorsports FX Nytro Owners Manual - Page 34
2010 Yamaha Motorsports FX Nytro Manual
Page 34 highlights
Control functions Compression damping force setting (for slow compression damping): Minimum (soft): 16 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 1 click(s) in direction (b)* * With the adjusting screw fully turned in direction (a) To increase the rebound damping force, turn the adjusting dial in direction (a). To decrease the rebound damping force, turn the adjusting dial in direction (b). 1 (b) (a) 1. Compression damping force adjusting knob Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 2 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) ESU11034 Adjusting the control rods (FX10XT) EWS00770 WARNING 1. Rebound damping force adjusting dial Rebound damping force setting: Minimum (soft): 20 click(s) in direction (b)* Standard: 11 click(s) in direction (b)* Maximum (hard): 3 click(s) in direction (b)* * With the adjusting dial fully turned in direction (a) FX10XT The compression damping force can be adjusted by turning the adjusting knob. To increase the compression damping force, turn the adjusting knob in direction (a). To decrease the compression damping force, turn the adjusting knob in direction (b). The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. The weight transfer can be adjusted by turning the adjusting nuts on the control rods. 1. Loosen the locknut while holding the adjusting nut. 28