2010 Yamaha Motorsports FX Nytro Owners Manual - Page 31
2010 Yamaha Motorsports FX Nytro Manual
Page 31 highlights
Control functions To increase the rebound damping force, turn the adjusting knob in direction (a). To decrease the rebound damping force, turn the adjusting knob in direction (b). FX10RTRS TIP The damping forces will not decrease past the minimum levels even if the adjusting knobs are turned out more than the minimum settings. ESU13133 Adjusting the spring preload of the center shock absorber and the rear torsion springs The spring preload can be adjusted by turning the adjusting nut on the center shock absorber and the adjusters on the rear torsion springs. Adjust the spring preload as follows. 1. Rebound damping force adjusting knob FX10XT Center shock absorber 1. Loosen the locknut. 2. To increase the spring preload and thereby harden the suspension, turn the adjusting nut in direction (a). To decrease the spring preload and thereby soften the suspension, turn the adjusting nut in direction (b). 1 1. Rebound damping force adjusting knob 2 Rebound damping setting: Minimum (soft): FX10RTRS 19 FX10XT 20 click(s) in direction (b)* Standard: FX10RTRS 10 FX10XT 11 click(s) in direction (b)* Maximum (hard): FX10RTRS 1 FX10XT 3 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) 3 (a) (b) 1. Spring preload adjusting nut 2. Distance A 3. Locknut TIP The spring preload setting is determined by measuring distance A, shown in the illustration. The longer distance A is, the higher the spring preload; the shorter distance A is, the lower the spring preload. 25