2010 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 71
2010 Yamaha Motorsports FX Nytro RTX Manual
Page 71 highlights
Periodic maintenance and adjustment 5. Install the new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 1. Headlight beam adjusting screw 3. Install the shroud. ESU12290 Fittings and fasteners Check the tightness of the fittings and fasteners. Tighten in proper sequence and torque if necessary. 1. Do not touch the glass part of the bulb. ESU12303 Battery This model is equipped with a VRLA (Valve Regulated Lead Acid) battery. There is no need to check the electrolyte or to add distilled water. However, the battery lead connections need to be checked and, if necessary, tightened. EWS00540 Bulb type: Halogen bulb 6. 7. Install the bulb holder cover, and then connect the headlight coupler. Install the shroud. ESU12861 Adjusting the headlight beams 1. 2. Remove the shroud. (See page 42 for removal procedures.) Turn the headlight beam adjusting screw in or out to adjust the headlight beams. To lower the headlight beams, turn the headlight beam adjusting screw in direction (a). To raise the headlight beams, turn the headlight beam adjusting screw in direction (b). WARNING Battery electrolyte is poisonous and dangerous. It contains sulfuric acid and can cause severe burns. Avoid contact with skin, eyes, or clothing. ANTIDOTE: G EXTERNAL: Flush with water. G INTERNAL: Drink large quantities of water or milk. Follow with milk of magnesia, beaten egg, or vegetable oil. Call physician immediately. G EYES: Flush with water for 15 minutes and get prompt medical attention. 65