2010 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 69
2010 Yamaha Motorsports FX Nytro RTX Manual
Page 69 highlights
Periodic maintenance and adjustment Shifted to right 6. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. Lower the snowmobile to the ground. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) 7. 8. Slide runners 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Check the slide runners for wear and damage. If the slide runners reach the wear limit, they should be replaced. Shifted to left 1. Slide runner 2. Wear limit height 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Slide runner wear limit height: 10.5 mm (0.41 in) ECS00350 NOTICE Ride on fresh snow frequently. Operating on ice or hard-packed snow will rapidly wear the slide runners. ESU12195 5. Adjust the drive track deflection to specification. NOTICE: The right and left adjusting nuts should be turned an equal amount. [ECS00592] Drive track deflection More than specified Turn in Turn in Less than specified Turn out Turn out Lubrication Lubricate the following points with the specified grease. Left adjusting nut Right adjusting nut 63