2010 Yamaha Motorsports FX Nytro RTX Owners Manual - Page 21
2010 Yamaha Motorsports FX Nytro RTX Manual
Page 21 highlights
Control functions ESU13520 Brake lever The snowmobile is stopped by braking the entire drive system. Squeeze the brake lever towards the handlebar grip to stop the snowmobile. 1. Headlight beam switch "LIGHTS" 2. High beam "HI" 3. Low beam "LO" ESU10674 Grip/thumb warmer adjustment switch The grip/thumb warmer adjustment switch controls the electrically heated handlebar grips and throttle lever. 1. Brake lever TIP When the brake lever is operated, the brake light will illuminate. The brake lever is equipped with a position adjuster. To adjust the brake lever position: 1. Loosen the locknut. 2. While lightly pushing the brake lever in direction (a), finger tighten the adjusting bolt to set the brake lever to the desired position. 1. Grip/thumb warmer adjustment switch To raise the temperature To raise the grip warmer temperature, press the " " side of the switch. To raise the thumb warmer temperature, press the " " side of the switch. To lower the temperature Continue to press the switch until the temperature level returns to the minimum level, and then raise the temperature to the desired level. See "Fuel meter and grip/thumb warmer level indicator" on page 11 for detailed information. 1. Locknut 2. Adjusting bolt 3. Tighten the locknut securely after adjusting the brake lever. 15