2008 Yamaha Motorsports RS Venture Owners Manual - Page 60
2008 Yamaha Motorsports RS Venture Manual
Page 60 highlights
Periodic maintenance 9. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 2. Remove the dipstick, wipe it off with a clean rag, and then insert it back into the filler hole. 1. Secondary sliding sheave 2. Secondary fixed sheave 1. Dipstick 3. 10. Install the V-belt between the secondary sliding and fixed sheaves. Remove the dipstick and check that the oil is between the maximum and minimum level marks. If the oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the maximum level mark. 1. V-belt 11. Install the drive guard and close the shroud. ESU12090 Drive chain housing EWS00430 1. Maximum level mark 2. Minimum level mark WARNING The engine, oil tank, brake disc, and coolant hoses will be very hot after the engine has been run. Avoid contact while they are still hot with any part of your body or clothing during inspection or repair. To check the drive chain housing oil level 1. Place the snowmobile on a level surface. 54