2008 Yamaha Motorsports RS Venture GT Owners Manual - Page 32
2008 Yamaha Motorsports RS Venture GT Manual
Page 32 highlights
Control functions Spring preload setting at the rear shock absorber (spring preload adjuster position): Minimum (soft): S Standard: M Maximum (hard): H Adjusting the 2-up adjusting block spring force The spring force can be adjusted by changing the position of the 2-up adjusting blocks. 1. 2. 3. 4. 2-up position (rider and passenger) Solo rider position Special tool Lock lever 3. Release the lock lever. ECS00280 CAUTION: Make sure that the 2-up adjusting blocks are installed in the same position on both sides of the snowmobile. ESU11030 Adjusting the control rods 1. 2-up adjusting block NOTE: Be sure to make this adjustment when there is no load (rider or cargo) on the snowmobile. 1. Install the special tools included in the owner's tool kit to the 2-up adjusting block. Pull the lock lever and turn the special tools to change the block position. The weight transfer can be adjusted by turning the control rod adjusting nut. 1. Loosen the locknut while holding the control rod adjusting nut. 2. Turn the control rod adjusting nut in direction (a) to increase weight transfer or direction (b) to decrease weight transfer. 2. 26