2008 Yamaha Motorsports Phazer Owners Manual - Page 72
2008 Yamaha Motorsports Phazer Manual
Page 72 highlights
Periodic maintenance Shifted to right ECS00591 CAUTION: The right and left adjusting nuts should be turned an equal amount. 6. Recheck alignment and deflection. If necessary, repeat steps 3 to 5 until the proper adjustment is achieved. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lb) 7. 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Slide runners Check the slide runners for wear and damage. If the slide runners reach the wear limit, they should be replaced. Shifted to left 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal 1. Slide runner 2. Wear limit height 5. Adjust the drive track deflection to specification. Drive track deflection More than specified Turn in Turn in Less than specified Turn out Turn out Slide runner wear limit height: 10.5 mm (0.41 in) ECS00350 CAUTION: Ride on fresh snow frequently. Operating on ice or hard-packed snow will rapidly wear the slide runners. Left adjusting nut Right adjusting nut 66