2008 Yamaha Motorsports Apex LTX Owners Manual - Page 54

2008 Yamaha Motorsports Apex LTX Manual

Page 54 highlights

Periodic maintenance 3. Remove the headlight unit bolt on each side of the snowmobile and the bolts shown on the top cover. 6. 1. Headlight unit bolt 7. 8. Place the air filter element frame in the original position, and then install the air filter case cover. Install the air filter case cover by hooking the fasteners. Install the headlight unit, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1. Bolt 4. 5. Slightly lift up the headlight unit, and then remove the air filter case cover. Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element, brush off the snow, and then install the air filter element. 9. Install the headlight unit bolts, and then tighten them to the specified torque. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

Periodic maintenance
48
3.
Remove the headlight unit bolt on each
side of the snowmobile and the bolts
shown on the top cover.
4.
Slightly lift up the headlight unit, and then
remove the air filter case cover.
5.
Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
6.
Place the air filter element frame in the
original position, and then install the air
filter case cover.
7.
Install the air filter case cover by hooking
the fasteners.
8.
Install the headlight unit, making sure to
insert the projections on the headlight
unit stay into the slots on the bottom of
the headlight unit.
9.
Install the headlight unit bolts, and then
tighten them to the specified torque.
1.
Headlight unit bolt
1. Bolt