2008 Yamaha Motorsports Apex LTX Owners Manual - Page 52

2008 Yamaha Motorsports Apex LTX Manual

Get 2008 Yamaha Motorsports Apex LTX PDF manuals and user guides View all 2008 Yamaha Motorsports Apex LTX manuals

Page 52 highlights

Periodic maintenance 2. Remove the headlight unit bolt on each side of the snowmobile and the bolts shown on the top cover. 1. Locknut 2. Throttle cable free play adjusting bolt 3. Throttle cable free play 1. Headlight unit bolt Throttle cable free play: 2.0-3.0 mm (0.08-0.12 in) 6. 7. Tighten the locknut. Connect the speedometer coupler and headlight couplers, and then install the headlight unit, making sure to insert the projections on the headlight unit stay into the slots on the bottom of the headlight unit. 1. Bolt 3. 4. 5. Disconnect the speedometer coupler and headlight couplers, and then remove the headlight unit. Loosen the locknut. Turn the adjusting bolt in or out until the specified throttle cable free play is obtained. 8. Install the headlight unit bolts, and then tighten them to the specified torque. Headlight unit bolt tightening torque: 3 Nm (0.3 m·kgf, 2.2 ft·lb) 9. Install the bolts on the top cover. 10. Install the shroud. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Periodic maintenance
46
2.
Remove the headlight unit bolt on each
side of the snowmobile and the bolts
shown on the top cover.
3.
Disconnect the speedometer coupler and
headlight couplers, and then remove the
headlight unit.
4.
Loosen the locknut.
5.
Turn the adjusting bolt in or out until the
specified throttle cable free play is ob-
tained.
6.
Tighten the locknut.
7.
Connect the speedometer coupler and
headlight couplers, and then install the
headlight unit, making sure to insert the
projections on the headlight unit stay into
the slots on the bottom of the headlight
unit.
8.
Install the headlight unit bolts, and then
tighten them to the specified torque.
9.
Install the bolts on the top cover.
10.
Install the shroud.
1.
Headlight unit bolt
1. Bolt
1. Locknut
2.
Throttle cable free play adjusting bolt
3.
Throttle cable free play
Throttle cable free play:
2.0–3.0 mm (0.08–0.12 in)
Headlight unit bolt tightening torque:
3 Nm (0.3 m·kgf, 2.2 ft·lb)