2007 Yamaha Motorsports Vino 125 Owners Manual - Page 68

2007 Yamaha Motorsports Vino 125 Manual

Page 68 highlights

Storage SCOOTER CARE AND STORAGE NOTE: Consult a Yamaha dealer for advice on what products to use. 1 2 3 4 5 6 7 8 9 EAU26300 Storage Short-term Always store your scooter in a cool, dry place and, if necessary, protect it against dust with a porous cover. ECA10820 c C 8 Storing the scooter in a poorly ventilated room or covering it with a tarp, while it is still wet, will allow water and humidity to seep in and cause rust. 8 To prevent corrosion, avoid damp cellars, stables (because of the presence of ammonia) and areas where strong chemicals are stored. Long-term Before storing your scooter for several months: 1. Follow all the instructions in the "Care" section of this chapter. 2. Drain the carburetor float chamber by loosening the drain bolt; this will prevent fuel deposits from building up. Pour the drained fuel into the fuel tank. 7-3 3. Fill up the fuel tank and add fuel stabilizer (if available) to prevent the fuel tank from rusting and the fuel from deteriorating. 4. Perform the following steps to protect the cylinder, piston rings, etc. from corrosion. a.Remove the spark plug cap and spark plug. b. Pour a teaspoonful of engine oil into the spark plug bore. c. Install the spark plug cap onto the spark plug, and then place the spark plug on the cylinder head so that the electrodes are grounded. (This will limit sparking during the next step.) d. Turn the engine over several times with the starter. (This will coat the cylinder wall with oil.) e. Remove the spark plug cap from the spark plug, and then install the spark plug and the spark plug cap. EWA10950 w To prevent damage or injury from sparking, make sure to ground the spark plug electrodes while turning

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

Storage<IXE>
SCOOTER CARE AND STORAGE
1
2
3
4
5
6
7
8
9
NOTE:
Consult
a Yamaha
dealer for advice on
what products to use.
EAU26300
Storage
Short-term
Always store your scooter in a
cool,
dry
place
and,
if
necessary,
protect it against
dust with a porous cover.
c
C
ECA10820
8 Storing the scooter in a poorly
ventilated room or covering it
with a tarp, while it is still wet,
will allow water and humidity to
seep in and cause rust.
8 To prevent corrosion, avoid
damp
cellars,
stables (because of
the presence of ammonia) and
areas where strong chemicals are
stored.
Long-term
Before storing your scooter for several
months:
1.
Follow all the instructions in the
“Care” section of this chapter.
2.
Drain the carburetor float chamber
by loosening the drain
bolt;
this will
prevent fuel deposits from building
up.
Pour the drained fuel into the
fuel tank.
7-3
3. Fill up the fuel tank and add fuel
stabilizer (if available)
to
prevent the
fuel tank from rusting and the fuel
from deteriorating.
4.
Perform the following steps to pro-
tect the cylinder, piston rings, etc.
from corrosion.
a.Remove the spark plug cap and
spark
plug.
b. Pour a teaspoonful of engine oil
into the spark plug bore.
c.
Install
the spark plug cap onto
the spark
plug,
and then place
the spark plug on the cylinder
head so that the electrodes are
grounded.
(This will limit spark-
ing during the next step.)
d.
Turn
the engine over several
times with the starter. (This will
coat the cylinder wall with oil.)
e. Remove the spark plug cap from
the spark
plug,
and then install
the spark plug
and
the spark plug
cap.
EWA10950
w
To prevent damage or injury from
sparking,
make sure to ground the
spark plug electrodes while turning