2007 Yamaha Motorsports Vino 125 Owners Manual - Page 49

2007 Yamaha Motorsports Vino 125 Manual

Get 2007 Yamaha Motorsports Vino 125 PDF manuals and user guides View all 2007 Yamaha Motorsports Vino 125 manuals

Page 49 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR then blow the dirt out with compressed air as shown. ECA10480 c C 8 Make sure that the air filter element is properly seated in the air filter case. 8 The engine should never be operated without the air filter element installed, otherwise the piston(s) and/or cylinder(s) may become excessively worn. solvent. To avoid the risk of fire or explosion, do not use gasoline or solvents with a low flash point. 1 ECA10520 c C To avoid damaging the air filter element, handle it gently and carefully, and do not twist it. 5. Apply oil of the recommended type to the entire surface of the sponge material, and then squeeze the excess oil out. NOTE: The air filter element should be wet but not dripping. Recommended oil: Engine oil 6. Insert the element into the air filter case. 7. Install the filter element holder by installing the screw. 8. Install the crankcase cover by installing the screws. 2 3 4 5 6 7 8 9 1 ZAUM00** 1. Air filter element 6. Install the air filter case cover by installing the screw. Cleaning the V-belt case air filter element 1. Remove the kickstarter lever by removing the bolt. 2. Remove the crankcase cover by removing the screws. 3. Remove the filter element holder by removing the screw. 4. Pull the air filter element out, and then clean it with solvent. After cleaning, remove the remaining solvent by squeezing the element. EWA10430 ZAUM00** 4. Check the air filter element for damage and replace it if necessary. 5. Insert the air filter element into the air filter case. w Use only a dedicated parts cleaning 6-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
PERIODIC MAINTENANCE AND MINOR REPAIR
then blow the dirt out with com-
pressed air as shown.
c
C
ECA10480
1
1.
Air filter element
4.
Check the air filter element for dam-
age and replace it if necessary.
5. Insert the air filter element into the
air filter case.
8 Make sure that the air filter ele-
ment is properly seated in the air
filter case.
8 The engine should never be op-
erated without the air filter ele-
ment installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.
6. Install the air filter case cover by
installing the screw.
Cleaning the V-belt case air filter ele-
ment
1.
Remove the kickstarter lever by re-
moving the bolt.
2.
Remove the crankcase cover by re-
moving the screws.
3. Remove the filter element holder by
removing the screw.
4.
Pull the air filter element out, and
then clean it with solvent. After
cleaning,
remove the remaining
solvent by squeezing the element.
EWA10430
w
Use only a dedicated parts cleaning
6-13
solvent. To avoid the risk of fire or
explosion, do not use gasoline or
solvents with a low flash point.
ECA10520
c
C
To avoid damaging the air filter ele-
ment, handle it gently and carefully,
and do not twist it.
5. Apply oil of the recommended type
to the entire surface of the sponge
material,
and then squeeze the ex-
cess oil out.
NOTE:
The air filter element should be wet but
not dripping.
Recommended oil:
Engine oil
6. Insert the element into the air filter
case.
7. Install the filter element holder by
installing the screw.
8. Install the crankcase cover by in-
stalling the screws.
1
2
3
4
5
6
7
8
9
ZAUM00**
ZAUM00**