2007 Yamaha Motorsports Vino 125 Owners Manual - Page 61

2007 Yamaha Motorsports Vino 125 Manual

Page 61 highlights

Headlight bulb, replacing PERIODIC MAINTENANCE AND MINOR REPAIR EAUT1240 ECA10640 EAU23780 Replacing the fuse c C Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. 1. Remove the headlight unit by removing the screws. 1 2 3 4 5 6 ZAUM00** Do not use a fuse of a higher amperage rating than recommended to avoid causing extensive damage to the electrical system and possibly a fire. 3. Turn the key to "ON" and turn on the electrical circuits to check if the devices operate. 4. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. ZAUM00** 1. Fuse The fuse holder is located beside the battery. Remove panel B to access the fuse. (See page 6-8.) If the fuse is blown, replace it as follows. 1. Turn the key to "OFF" and turn off all electrical circuits. 2. Remove the blown fuse, and then install a new fuse of the specified amperage. Specified fuse: 10.0 A 1. Headlight unit 7 8 9 2. Disconnect the headlight coupler, and then remove the bulb cover. 6-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

Headlight
bulb,
replacing<IXE>
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the fuse
EAUT1240
1.
Fuse
The fuse holder is located beside the
battery. Remove panel B to access the
fuse.
(See page 6-8.)
If the fuse is blown, replace it as
fol-
lows.
1.
Turn the key to “OFF” and turn off
all electrical circuits.
2.
Remove the blown fuse, and then
install a new fuse of the specified
amperage.
ECA10640
c
C
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
3. Turn the key to “ON” and turn on
the electrical circuits to check if the
devices operate.
4.
If the fuse immediately blows again,
have a Yamaha dealer check the
electrical system.
Specified fuse:
10.0 A
EAU23780
Replacing the headlight bulb
This model is equipped with a quartz
bulb
headlight.
If the headlight bulb burns
out, replace it as follows.
1.
Remove the headlight unit by re-
moving the screws.
1.
Headlight unit
2.
Disconnect the headlight coupler,
and then remove the bulb cover.
1
2
3
4
5
6
7
8
9
6-25
ZAUM00**
ZAUM00**