2006 Yamaha Motorsports Virago 250 Owners Manual - Page 70
2006 Yamaha Motorsports Virago 250 Manual
Page 70 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EAU24210 Replacing a turn signal light bulb 1. Remove the turn signal lens by removing the screws. 1. Tail/brake light bulb 1. Turn signal light bulb 6 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 1. Screw 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 CAUTION: Do not overtighten the screws, otherwise the lens may break. 2. Remove the defective bulb by pushing it in and turning it counterclockwise. CAUTION: Do not overtighten the screws, otherwise the lens may break. 6-34
PERIODIC MAINTENANCE AND MINOR REPAIR
6-34
6
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
ECA10680
Do not overtighten the screws, oth-
erwise the lens may break.
EAU24210
Replacing a turn signal light
bulb
1.
Remove the turn signal lens by re-
moving the screws.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
ECA10680
Do not overtighten the screws, oth-
erwise the lens may break.
1.
Tail/brake light bulb
1. Screw
1.
Turn signal light bulb