2006 Yamaha Motorsports Virago 250 Owners Manual - Page 47

2006 Yamaha Motorsports Virago 250 Manual

Get 2006 Yamaha Motorsports Virago 250 PDF manuals and user guides View all 2006 Yamaha Motorsports Virago 250 manuals

Page 47 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: The engine oil should be between the minimum and maximum level marks. 2. Place an oil pan under the engine to collect the used oil. 3. Remove the engine oil filler cap and drain bolt to drain the oil from the crankcase. NOTE: Skip steps 4-6 if the oil filter element is not being replaced. 4. Remove the oil filter element cover by removing the bolts. 1. Engine oil level check window 2. Maximum level mark 3. Minimum level mark 1. Engine oil filler cap 1. Bolt 2. Oil filter element cover 6 4. If the engine oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. To change the engine oil (with or without oil filter element replacement) 1. Start the engine, warm it up for several minutes, and then turn it off. 5. Remove and replace the oil filter element and O-ring. 1. Engine oil drain bolt 6-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
NOTE:
The engine oil should be between the
minimum and maximum level marks.
4.
If the engine oil is below the mini-
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
To change the engine oil (with or
without oil filter element replace-
ment)
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2.
Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
Skip steps 4–6 if the oil filter element is
not being replaced.
4.
Remove the oil filter element cover
by removing the bolts.
5. Remove and replace the oil filter
element and O-ring.
1.
Engine oil level check window
2.
Maximum level mark
3.
Minimum level mark
1.
Engine oil filler cap
1.
Engine oil drain bolt
1. Bolt
2.
Oil filter element cover