2006 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 99

2006 Yamaha Motorsports Grizzly 125 Automatic Manual

Page 99 highlights

EBU14892 8. Fill the engine with oil and install the dipstick. Recommended oil: See page 10-2. Oil quantity: Periodic oil change 1.25 L (1.10 Imp qt, 1.32 US qt) cC Be sure no foreign material enters the crankcase. 9. Warm up the engine for several minutes at idle speed. Check for oil leakage while warming up. Final transmission oil The final transmission case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the machine. In addition, the final transmission oil must be changed at the intervals specified in the periodic maintenance and lubrication chart. Final transmission oil measurement 1. Place the machine on a level surface. 2. Remove the screw and check the oil level. It should be up to the brim of the hole. If the oil level is low, remove the oil filler bolt, and then add sufficient oil of the recommended type to raise it to the proper level. w e cC If oil leakage is found, stop the engine immediately and check for the cause. q 8-7 1. Screw 2. Brim 3. Correct oil level

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153

8-7
EBU14892
Final transmission oil
The final transmission case must be checked for
oil leakage before each ride. If any leakage is
found, have a Yamaha dealer check and repair
the machine. In addition, the final transmission
oil must be changed at the intervals specified in
the periodic maintenance and lubrication chart.
Final transmission oil measurement
1.
Place the machine on a level surface.
2.
Remove the screw and check the oil level. It
should be up to the brim of the hole. If the
oil level is low, remove the oil filler bolt, and
then add sufficient oil of the recommended
type to raise it to the proper level.
8. Fill the engine with oil and install the dip-
stick.
c
C
Be sure no foreign material enters the
crankcase.
9. Warm up the engine for several minutes at
idle speed. Check for oil leakage while
warming up.
c
C
If oil leakage is found, stop the engine imme-
diately and check for the cause.
w
e
q
Recommended oil:
See page 10-2.
Oil quantity:
Periodic oil change
1.25 L (1.10 Imp qt, 1.32 US qt)
1.
Screw
2.
Brim
3.
Correct oil level