2006 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 98
2006 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 98 highlights
4. Remove the dipstick and drain bolt to drain the oil. q 5. Clean the oil strainer with solvent. 6. Inspect the O-ring and replace it if damaged. 7. Install the O-ring, oil strainer, compression spring and drain bolt. Tighten the drain bolt to specification. cC r e 1. Drain bolt 3. Compression spring w q Before installing the drain bolt, be sure to install the O-ring, compression spring and oil strainer. 2. O-ring 4. Oil strainer cC When removing the drain bolt, the compression spring, oil strainer and O-ring will fall out. Take care not to lose these parts. Tightening torque: Drain bolt: 32 Nm (3.2 m0kgf, 23 ft0lbf) 8-6
8-6
4. Remove the dipstick and drain bolt to drain
the oil.
c
C
When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall
out. Take care not to lose these parts.
5.
Clean the oil strainer with solvent.
6. Inspect the O-ring and replace it if dam-
aged.
7. Install the O-ring, oil strainer, compression
spring and drain bolt. Tighten the drain bolt
to specification.
c
C
Before installing the drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
Tightening torque:
Drain bolt:
32 Nm (3.2 m
0
kgf, 23 ft
0
lbf)
q
r
e
w
q
1.
Drain bolt
2. O-ring
3.
Compression spring
4.
Oil strainer