2006 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 120
2006 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 120 highlights
4. After adjusting, be sure to tighten the locknut and the axle holding bolts. cC If measurement A of the drive chain adjusting bolt is less than 27 mm (1.06 in), ask a Yamaha dealer to replace the drive chain. Tightening torque: Locknut: 15.5 Nm (1.55 m0kgf, 11.2 ft0lbf) Axle holding bolts (upper): 85 Nm (8.5 m0kgf, 61 ft0lbf) Axle holding bolts (lower): 60 Nm (6.0 m0kgf, 43 ft0lbf) 5. Finger tighten the hub stopper bolt and tighten the hub stopper bolt locknut. Tightening torque: Locknut: 15.5 Nm (1.55 m0kgf, 11.2 ft0lbf) A A. Measurement A 8-28
8-28
4. After adjusting, be sure to tighten the lock-
nut and the axle holding bolts.
5.
Finger tighten the hub stopper bolt and tight-
en the hub stopper bolt locknut.
c
C
If measurement
A
of the drive chain adjust-
ing bolt is less than 27 mm (1.06 in), ask a
Yamaha dealer to replace the drive chain.
Tightening torque:
Locknut:
15.5 Nm (1.55 m
0
kgf, 11.2 ft
0
lbf)
Axle holding bolts (upper):
85 Nm (8.5 m
0
kgf, 61 ft
0
lbf)
Axle holding bolts (lower):
60 Nm (6.0 m
0
kgf, 43 ft
0
lbf)
Tightening torque:
Locknut:
15.5 Nm (1.55 m
0
kgf, 11.2 ft
0
lbf)
A
A. Measurement
A