2006 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 97
2006 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 97 highlights
EBU08963 Engine oil The engine oil level should be checked before each ride. In addition, the oil must be changed at the intervals specified in the periodic maintenance and lubrication chart. Engine oil level measurement 1. Place the machine on a level surface. 2. Warm up the engine for several minutes and stop it. 3. Wait a few minutes until the oil level settles, remove the oil filler cap, wipe the dipstick clean, and then insert the dipstick in the filler hole without screwing it in. q w e 1. Dipstick 3. Minimum level mark 2. Maximum level mark cC Be sure no foreign material enters the crankcase. Engine oil replacement and oil filter cleaning 1. Place the machine on a level surface. 2. Warm up the engine for several minutes and stop it. 3. Place a container under the engine to collect the used oil. 8-5 NOTE: Wait a few minutes until the oil level settles before checking. 4. Remove the dipstick and inspect the oil level. 5. The oil level should be between the maximum and minimum marks. If the level is low, add oil to raise it to the proper level.