2005 Yamaha Motorsports VK 540 lll Owners Manual - Page 28

2005 Yamaha Motorsports VK 540 lll Manual

Page 28 highlights

ESU00921 Brake Test the brake at a low speed when starting out to make sure that it is working properly. If the brake does not provide proper braking performance, inspect the brake for wear. (See page 8-14 for more details.) WARNING @ Do not operate the snowmobile if you find any problems in the brake system. You could lose braking ability, which could lead to an accident. Ask a Yamaha dealer to inspect and repair the brake system. @ CAUTION: @ Make sure that the brake lever end does not project out over the handlebar end. This is to prevent brake lever damage when the snowmobile is placed on its side. @ ESU00941 V-belt Open the shroud and remove the drive guard. Check the V-belt for wear and damage. Replace if necessary. Wear limit a: 31.4 mm (1.24 in) WARNING @ G G @ Make sure that the drive guard is tightened securely before operating the snowmobile. Never run the engine without the V-belt or with the drive guard removed. 6-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

6-4
ESU00921
Brake
Test the brake at a low speed when starting out to make
sure that it is working properly. If the brake does not pro-
vide proper braking performance, inspect the brake for
wear. (See page 8-14 for more details.)
WARNING
@
Do not operate the snowmobile if you find any prob-
lems in the brake system. You could lose braking
ability, which could lead to an accident. Ask a
Yamaha dealer to inspect and repair the brake sys-
tem.
@
CAUTION
:
@
Make sure that the brake lever end does not project
out over the handlebar end. This is to prevent brake
lever damage when the snowmobile is placed on its
side.
@
ESU00941
V-belt
Open the shroud and remove the drive guard.
Check the V-belt for wear and damage. Replace if neces-
sary.
WARNING
@
Make sure that the drive guard is tightened
securely before operating the snowmobile.
Never run the engine without the V-belt or with
the drive guard removed.
@
Wear limit
a
:
31.4 mm (1.24 in)