2004 Yamaha Motorsports VMAX Owners Manual - Page 75

2004 Yamaha Motorsports VMAX Manual

Page 75 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR EAU24360 Front wheel EAU24430 To remove the front wheel EWA10820 WARNING G G 1. Turn signal light bulb 2. Remove the defective bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. ECA10680 It is advisable to have a Yamaha dealer service the wheel. Securely support the motorcycle so that there is no danger of it falling over. 1. Place the motorcycle on the centerstand. 2. Disconnect the speedometer cable from the front wheel. 3. Remove the brake calipers by removing the bolts. ECA11060 1. 2. 3. 4. Speedometer cable Bolt Front wheel axle pinch bolt Wheel axle 5. Pull the wheel axle out, and then remove the wheel. EAU24842 6 CAUTION: Do not pull the brake lever after the brake caliper has been removed, otherwise the brake pads will be forced shut. 4. Loosen the front wheel axle pinch bolt, then the wheel axle. CAUTION: Do not overtighten the screws, otherwise the lens may break. To install the front wheel 1. Install the speedometer gear unit into the wheel hub so that the projections mesh with the slots. 6-36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

PERIODIC MAINTENANCE AND MINOR REPAIR
6-36
6
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3.
Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
ECA10680
Do not overtighten the screws, oth-
erwise the lens may break.
EAU24360
Front wheel
EAU24430
To remove the front wheel
WARNING
EWA10820
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so that there is no danger
of it falling over.
1.
Place the motorcycle on the cen-
terstand.
2. Disconnect the speedometer ca-
ble from the front wheel.
3.
Remove the brake calipers by re-
moving the bolts.
CAUTION:
ECA11060
Do not pull the brake lever after the
brake caliper has been removed,
otherwise the brake pads will be
forced shut.
4.
Loosen the front wheel axle pinch
bolt, then the wheel axle.
5.
Pull the wheel axle out, and then
remove the wheel.
EAU24842
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
jections mesh with the slots.
1.
Turn signal light bulb
1.
Speedometer cable
2. Bolt
3.
Front wheel axle pinch bolt
4.
Wheel axle