2004 Yamaha Motorsports VMAX Owners Manual - Page 55
2004 Yamaha Motorsports VMAX Manual
Page 55 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: Check the rubber plugs for damage and replace them if necessary. 12. Turn the coolant drain cock to "OFF". 13. Pour the recommended coolant into the reservoir to the maximum level, and then install the cap. 14. Pour the recommended coolant into the radiator until it is full. Antifreeze/water mixture ratio: 1:1 Recommended antifreeze: High-quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines Coolant quantity: Radiator capacity (including all routes): 3.05 L (3.22 us.qt) (2.68 Imp.qt) Coolant reservoir capacity (up to the maximum level mark): 0.30 L (0.32 us.qt) (0.26 Imp.qt) 1. Water pump drain bolt 1. Rubber coolant drain plug 7. Remove the cylinder drain plug covers on the outside of the cylinder blocks by removing the screws. 9. After the coolant is completely drained, thoroughly flush the cooling system with clean tap water. 10. Install the water pump drain bolt, and then tighten it to the specified torque. NOTE: Check the washer for damage and replace it if necessary. Tightening torque: Water pump drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 6 1. Screw 8. Remove the rubber coolant drain plugs to drain the coolant from the engine. 11. Install the rubber coolant drain plugs, and then install the cylinder drain plug covers. 6-16