2004 Yamaha Motorsports Big Bear 400 4x4 Owners Manual - Page 142
2004 Yamaha Motorsports Big Bear 400 4x4 Manual
Page 142 highlights
EBU01121 Wheel installation 1. Install the wheel and the nuts. NOTE: G Tapered nuts are used for both the front and rear wheels. Install the nut with its tapered side towards the wheel. G The arrow mark on the tire must point toward the rotating direction of the wheel. _ _ 1. Tapered nut 2. Lower the ATV so that the wheel is on the ground. 3. Tighten the wheel nuts to the specified torque. Wheel nut torque: Front: 64 Nm (6.4 m·kgf, 46 ft·lbf) Rear: 55 Nm (5.5 m·kgf, 40 ft·lbf) 1. Arrow mark 8-33
8-33
EBU01121
Wheel installation
1.
Install the wheel and the nuts.
NOTE:
_
●
Tapered nuts are used for both the front
and rear wheels. Install the nut with its ta-
pered side towards the wheel.
●
The arrow mark
on the tire must point
toward the rotating direction of the wheel.
_
1.
Arrow mark
1.
Tapered nut
2.
Lower the ATV so that the wheel is on the
ground.
3.
Tighten the wheel nuts to the specified
torque.
Wheel nut torque:
Front: 64 Nm (6.4 m·kgf, 46 ft·lbf)
Rear: 55 Nm (5.5 m·kgf, 40 ft·lbf)