2004 Yamaha Motorsports Big Bear 400 4x4 Owners Manual - Page 115

2004 Yamaha Motorsports Big Bear 400 4x4 Manual

Get 2004 Yamaha Motorsports Big Bear 400 4x4 PDF manuals and user guides View all 2004 Yamaha Motorsports Big Bear 400 4x4 manuals

Page 115 highlights

NOTE: The oil level should be between the minimum and maximum level marks. _ _ 5. If the engine oil is at or below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. CAUTION: _ Be sure no foreign material enters the crankcase. _ To change the engine oil (with or without oil filter element cleaning) 1. Place the ATV on a level surface. 2. Warm up the engine for several minutes, and then turn it off. 3. Place a container under the engine to collect the used oil. 4. Remove the engine oil filler cap, and then remove the engine oil drain bolt to drain the oil from the crankcase. 6. Insert the dipstick into the oil filler hole, and then tighten the engine oil filler cap. 1. Engine oil drain bolt 3. Compression spring 2. O-ring 4. Oil strainer 8-6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
8-6
NOTE:
_
The oil level should be between the minimum
and maximum level marks.
_
5.
If the engine oil is at or below the mini-
mum level mark, add sufficient oil of the
recommended type to raise it to the cor-
rect level.
CAUTION:
_
Be sure no foreign material enters the
crankcase.
_
6.
Insert the dipstick into the oil filler hole,
and then tighten the engine oil filler cap.
To change the engine oil (with or without
oil filter element cleaning)
1.
Place the ATV on a level surface.
2.
Warm up the engine for several minutes,
and then turn it off.
3.
Place a container under the engine to
collect the used oil.
4.
Remove the engine oil filler cap, and then
remove the engine oil drain bolt to drain
the oil from the crankcase.
1.
Engine oil drain bolt
2. O-ring
3.
Compression spring
4.
Oil strainer