2004 Yamaha Motorsports Big Bear 400 4x4 Owners Manual - Page 116
2004 Yamaha Motorsports Big Bear 400 4x4 Manual
Page 116 highlights
CAUTION: _ When removing the engine oil drain bolt, the compression spring, oil strainer and O-ring will fall out. Take care not to lose these parts. _ 6. Clean the oil strainer and oil filter element with solvent. 7. Check the O-ring for damage and replace it if necessary. NOTE: Skip steps 5-9 if the oil filter element is not being cleaned. _ _ 5. Remove the oil filter cover by removing the bolts, and then remove the oil filter element. 1. O-ring 2. Oil filter element 8. Install the oil filter element and O-ring. NOTE: Make sure the O-ring is seated properly. _ _ 1. Oil filter cover 2. Oil filter cover bolt (× 3) 8-7
8-7
CAUTION:
_
When removing the engine oil drain bolt,
the compression spring, oil strainer and
O-ring will fall out. Take care not to lose
these parts.
_
NOTE:
_
Skip steps 5–9 if the oil filter element is not be-
ing cleaned.
_
5.
Remove the oil filter cover by removing
the bolts, and then remove the oil filter el-
ement.
1.
Oil filter cover
2.
Oil filter cover bolt (
×
3)
6.
Clean the oil strainer and oil filter element
with solvent.
7.
Check the O-ring for damage and re-
place it if necessary.
1.
O-ring
2.
Oil filter element
8.
Install the oil filter element and O-ring.
NOTE:
_
Make sure the O-ring is seated properly.
_