2004 Yamaha Motorsports Big Bear 400 4x4 Owners Manual - Page 139
2004 Yamaha Motorsports Big Bear 400 4x4 Manual
Page 139 highlights
EBU00834 EBU00346 Adjusting the rear brake light switch The rear brake light switch, which is activated by the brake pedal and brake levers, is properly adjusted when the brake light comes on just before braking takes effect. If necessary, adjust the brake light switch as follows. Turn the adjusting nut while holding the rear brake light switch in place. To make the brake light come on earlier, turn the adjusting nut in direction a. To make the brake light come on later, turn the adjusting nut in direction b. Clutch adjustment 1. Loosen the locknut. 2. Slowly turn the adjusting bolt counterclockwise until resistance is felt. Then, turn it 1/8 turn clockwise. 1. Locknut 2. Adjusting bolt 1. Rear brake light switch 2. Rear brake light switch adjusting nut 8-30