2003 Yamaha Motorsports VMAX Owners Manual - Page 94
2003 Yamaha Motorsports VMAX Manual
Page 94 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: Make sure that there is enough space between the brake pads before installing the brake calipers onto the brake discs. _ _ 9. Push down hard on the handlebar several times to check for proper fork operation. 1. Retainer 2. Lift the wheel up between the fork legs. NOTE: Make sure that the slot in the speedometer gear unit fits over the retainer on the fork leg. _ _ 6 5. Install the brake hose holders by installing the bolts. 6. Take the motorcycle off the centerstand so that the front wheel is on the ground. 7. Tighten the wheel axle, then the front wheel axle pinch bolt and the brake caliper bolts to the specified torques. Tightening torques: Wheel axle: 58 Nm (5.8 m·kgf, 42 ft·lbf) Front wheel axle pinch bolt: 20 Nm (2.0 m·kgf, 14 ft·lbf) Brake caliper bolt: 40 Nm (4.0 m·kgf, 29 ft·lbf) 8. Connect the speedometer cable. 3. Insert the wheel axle. 4. Install the brake calipers by installing the bolts. 6-43