2003 Yamaha Motorsports VMAX Owners Manual - Page 91
2003 Yamaha Motorsports VMAX Manual
Page 91 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR 1. Screw (× 2) EAU04187 1. Headlight bulb holder 1. Do not touch the glass part of the bulb. EC000105 Replacing the headlight bulb This motorcycle is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. 1. Remove the headlight unit by removing the screws. 2. Disconnect the headlight coupler, and then remove the bulb cover. 3. Remove the headlight bulb holder by turning it counterclockwise, and then remove the defective bulb. EW000119 WARNING Headlight bulbs get very hot. Therefore, keep flammable products away from a lit headlight bulb, and do not touch the bulb until it has cooled down. _ _ 4. Place a new headlight bulb into position, and then secure it with the bulb holder. CAUTION: Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. _ _ 6 6-40 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary.